Manage multiple wireless networks from a single control panel with the Ubiquiti® UniFi® nanoHD Access Point (AP). The 802.11ac Wave 2 MU-MIMO technology enables the UniFi® AP to communicate with various clients simultaneously to increase multi-user (MU) throughput experience. The UniFi nanoHD is a compact 4x4 MU-MIMO 802.11ac Wave 2 dual-band access point with an aggregate radio rate of over 2 Gbps and supports over 200 concurrent users. Engineered to take advantage of 802.11ac Wave 2, the UniFi nanoHD provides powerful multi-user support in an elegant, nano-sized design. Features: Four-Stream 802.11ac Wave 2 Technology.
| Mounting Bracket |
| Screws (Qty. 4) |
| Keps Nuts (Qty. 4) |
| Gigabit PoE* (48V, 0.3A) with Mount Bracket |
* Included only in the single-pack of the UAP-nanoHD.
- CAT5 cable
- Phillips screwdriver
- Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
- Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed)
IMPORTANT: The UAP-nanoHD requires the UniFi Controller v5.7 or higher, available at: ui.com/download/unifi |
System Requirements
- Microsoft Windows 7/8/10, Mac OS X, or Linux
- Java Runtime Environment 1.8 (or above)
- Web Browser: Google Chrome (Other browsers may have limited functionality.)
- UniFi Controller software v5.7 or higher (available at: ui.com/download/unifi)
LED
Ports
Locking Notch |
|---|
The Locking Notch will be used with the Mounting Bracket to help secure the UniFi AP. (This is described further in the Mounting Bracket section.) |
Reset |
The Reset button serves two functions for the UniFi AP:
|
Ethernet |
This Gigabit Ethernet port is used to connect the power and should be connected to the LAN and DHCP server. |
Cable Feed Plug |
If your Ethernet cable feeds along the mounting surface, remove the Cable Feed Plug. |
Mounting Bracket
Locking Tab | |||
|---|---|---|---|
During installation, the Locking Tab on the Mounting Bracket moves from the Initial Position to the Final Position, where the Locking Tab fits securely into the Locking Notch on the UniFi AP to help prevent theft.
|
The device can be mounted on the wall or ceiling. Perform the steps for the appropriate installation.
Wall Mount
Optional
Ceiling Mount
The UAP-nanoHD features auto-sensing 802.3af PoE support and can be powered by any of the following:
- Ubiquiti UniFi Switch with PoE
- 802.3af PoE compliant switch
- Ubiquiti Gigabit PoE Adapter (48V, 0.3A)
Unifi Ap Nanohd Mesh
The single-pack of the UAP-nanoHD includes one Gigabit PoE adapter. For multi-pack units, PoE adapters or a UniFi Switch with PoE may be purchased separately.
Connecting to a PoE Switch
Connect the Ethernet cable from the UniFi AP directly to an 802.3af-compliant port on the switch.
Unifi Ap-nanohd Adoption Failed
UAP-nanoHD | |
Dimensions | 160 x 160 x 32.65 mm (6.3 x 6.3 x 1.29') |
|---|---|
Weight
| 300 g (10.6 oz)
|
Networking Interface | (1) RJ45 GbE |
Buttons | (1) Reset to Defaults |
Power Method | 802.3af |
Power Supply | 48V, 0.3A Gigabit PoE Adapter* |
Max. Power Consumption | 10.5W |
Operating Frequency | 2.4 GHz 5 GHz |
Max. TX Power
|
|
Antenna Gain
|
|
MIMO
|
|
Radio Rate
|
|
Wi-Fi Standards | 802.11 a/b/g/n/ac/ac-wave2 |
Wireless Security | WEP, WPA-PSK, |
BSSID | 8 per Radio |
Mounting | Wall/Ceiling (Kits Included) |
Operating Temperature | -10 to 70° C (14 to 158° F) |
Operating Humidity | 5 to 95% Noncondensing |
Certifications | CE, FCC, IC |
* Only the single-pack of the UAP-nanoHD includes a PoE adapter.
Operating Frequency (MHz) | ||
US/CA | 2400 - 2483.5 | |
|---|---|---|
U-NII-1 | 5150 - 5250 | |
U-NII-2A | 5250 - 5350 | |
U-NII-2C | 5470 - 5725 | |
U-NII-3 | 5725 - 5850 | |
Worldwide | 2400 - 2483.5 | |