- Remote Control USB Encoder The optional RC-28 utilizes the same tuning knob and encoder used on Icom HF radios, providing a tactile option for the RS-BA1 software. The encoder includes a PTT and two user-programmable function keys. The RC-28 is not a standalone control for Icom radios and may only be used with the RS-BA1 software.
- The radio control flying hobby is a fast moving one, and nothing stays still for very long. RC flight simulator manufacturers are regularly releasing updates of their sims, whether it's releasing new aircraft or flying sites, or complete newer versions of the sim.
- Ham Radio Deluxe is an Amateur Radio software suite that allows for the control of most popular Amateur Transceivers using a Computer and a Computer Interface. PLEASE NOTE: We are not affiliated with the developers of this software and make no guarantee of its effectiveness.
WCS Radio Net Logger is the perfect way for all radio operators to keep track of their on-air meetings. Whether you’re a net control operator, amateur radio net participant, emergency coordinator or you are just taking notes, this software makes it easy to record information about your nets.
KENWOOD Radio Control Program
ARCP-590G Version 1.04 | Last updated : January 30, 2019 |
| | About this software | | This is the control software for the TS-590G transceiver. It is used to control the TS-590G via a PC. | | The transceiver data, such as the memory, the menu, and the Auto Mode frequency, can be edited and saved using a PC via this software, and the data can also be written to the transceiver. | | The TS-590G transceiver can also be controlled with the KENWOOD NETWORK COMMAND SYSTEM via a network. | | For the TS-590S, please use the ARCP-590. |
|
| | About virtual COM port driver | | A virtual COM port driver needs to be installed onto the PC to use the ARCP-590G with a USB cable. | | ATTENTION:Do not connect the transceiver to a PC using a USB cable before installing the virtual COM port driver. |
| | Operating Environment | | 1. | Operating System (OS)
Windows® 7 (Service Pack 1 or later) (32-bit or 64-bit)
Windows® 8.1 (RTM or later) (32-bit or 64-bit)
Windows® 10 (Version 1703 (Build 15063.0) or later) (32-bit or 64-bit)
Note:
| This software is designed to run on the above operating systems. | | Applicable operating systems are subject to change without notice due to the end of the technical support by Microsoft Corporation or change of the product specifications. |
| | 2. | Processor
Faster than the recommended CPU for each OS. | | 3. | System Memory (RAM)
Larger than the recommended System Memory for each OS. | | 4. | Free Hard Drive Space
100 MB or more of free hard drive space. | | 5. | Runtime
Microsoft .NET Framework 3.5 (includes .NET 2.0 and 3.0). | | 6. | Peripheral Devices
| A display with resolutions higher than XGA (1024 x 768). | | A keyboard and a mouse, or other pointing devices. | | USB 2.0 or RS-232C interface. |
Note:
| If the transceiver is connected to a PC using a USB cable, ensure that the connection is directly in place. ARCP-590G may not behave properly if a connection is in place through a USB hub.. | | Download and install the virtual COM port driver to make a USB connection possible for command communications via a USB connector. | Following are the equipment and software that are required to enable voice communications to be transmitted and received by the transceiver which is connected to a PC using a USB cable.
ARUA-10 software.
Sound function.
A speaker and a microphone.(Or a headset.) |
| | 7. | Network function and available networking environment (LAN or high-speed broadband) is necessary when using the KENWOOD NETWORK COMMAND SYSTEM. |
| | Usage Notes | | If you are remotely controlling the Transceiver using this software via a network such as the Internet, you must conform to the radio laws and relevant domestic laws of the country and/or area where the Transceiver and relevant equipment are installed. | | If any problem occurs while you are remotely controlling the Transceiver and relevant equipment, the responsibility of finding a solution to the problem is left solely to the user who remotely control the Transceiver and relevant equipment. | | Users are prohibited to assign, rent, lease, redistribute, or resell the software. | | Users are prohibited to revise, change, translate, merge, de-compile, or reverse engineer the software. | | JVC KENWOOD Corporation does not warrant that quality and functions of this software comply with each user's purpose of use of this software, and unless specifically described in this document, JVC KENWOOD Corporation shall be free from any responsibilities to any defects and indemnities to any damages or losses. Selection and installation of this software shall be made by the User's designation. The User shall take for the use and effects of this Software. | | JVC KENWOOD Corporation shall be free from any responsibilities for any incidental losses or damages, such as missing communications or a calling opportunity caused by a failure or performance error of this Software. | | JVC KENWOOD Corporation shall own all copyrights and other intellectual properties for the software and all manuals and documents attached to the software. The user shall be allowed to use, not to resell, the software by obtaining a license from JVC KENWOOD Corporation. While the media in which the software is stored is possessed by the user, the ownership for the software itself shall be reserved for JVC KENWOOD Corporation. |
|
| | Installing the ARCP-590G | Extract the downloaded file 'ARCP590G_104.zip' into a designated folder.
In the designated folder, a folder labeled 'ARCP590G_104' will be created.
Execute the 'Setup.exe' in the folder labeled 'ARCP590G_104', and follow the instructions that appear on the display to install ARCP-590G.
Note:
| Administrator privileges are required when installing the software. | | To update ARCP-590G, execute the same procedure as used for installation, and follow the instructions that appear on the display to install the software. The latest update is written and installed over the currently installed program. |
|
| | Uninstalling the ARCP-590G | Select 'ARCP-590G' in 'Control Panel - Programs and Features' for Windows® 7/8.1, or in 'Settings - Apps & features' for Windows® 10, and follow the instructions that appear on the display to uninstall the software. Or double-click 'Setup.exe', and follow the instructions that appear on the display to uninstall the software.
| Administrative privileges are required to uninstall ARCP-590G. | | Always exit ARCP-590G before uninstalling the software. |
|
| If you agree with the details listed above, click the following link to download the ARCP-590G software.
(The latest version includes all previous updates.) | | ARCP-590G Ver.1.04 :ARCP590G_104.zip 13.4MB download | | Update History | Ver.1.04 (January 30, 2019) | Adds the TS-590SG firmware Ver.1.05 compatibility. |
Ver.1.03 (November 17, 2016) | Adds Windows® 10 compatibility. |
Ver.1.02 (July 28, 2015) | Adds the TS-590SG firmware Ver.1.02 compatibility. | | Supports COM1 through COM256. | | Adds a setting value of 'Auto' for [Baud Rate] in the [Tool] - [Setup] dialog box. |
Ver.1.01 (January 29, 2015) | Improves stability when controlling the TS-590SG via the Internet. |
Ver.1.00 (October 31, 2014) |
| | Microsoft®, Windows®, and Windows logo are registered trademarks of Microsoft Corporation in the United States and/or other countries..NET Framework is a trademark or a registered trademark of Microsoft Corporation in the United States and/or other countries. |
|
From The RadioReference Wiki
This article will be utilized as a high level index for all the software listed in our wiki.
Indexed Groups of Software
- Amateur Radio Transceiver Control - For ham applications and some HF receivers
- Popular Software for GRE Scanners - For GRE marketed scanners
- Popular Software for Radio Shack Scanners - For RS marketed scanners
- Receiver Software Applications - Mostly for HF receivers, some ham applications
- SDR Software Applications - Software that interfaces with or supports Software Defined Radios
- Trunked Radio Decoders - For decoding and interpreting the data channel of trunked systems
Multiple Scanner Support
These packages support multiple brands of Uniden/RS scanners and GRE/RS/Whistler, and are sometimes preferred over having multiple software packages for each scanner owned;
- Uniden Legacy Software Support for non-DMA Uniden Scanners
- Uniden DMA Software Support For the Uniden DMA Scanners
- Object Oriented Scanner Software for the keyboard-enabled GRE/RS/Whistler object oriented scanners
Other Software
Please utilize this area to catalog applications for which we currently have no entries in our scanners or receivers area.
- Probe supports the Optocom, Optoscan 456/535 and Optoscan Lite
Locally Hosted Software User Guides
- Use this section to enable users to quickly find which user guides or help pages for software that are hosted on this wiki
- GRE/RS Object Oriented Scanners
- RS PRO-96/Pro-2096
Sdr Radio Control Software
- Uniden DMA Scanners
- Uniden Home Patrol
- Other Software Packages
Radio Control Software
Retrieved from 'https://wiki.radioreference.com/index.php?title=Radio_Control_Software&oldid=275721'